/**
MAX_PD_WRITE_ADDRESS: Maximum address for the process output data (Sync Manager 2)<br>
inside the application memory of the EtherCAT Slave Controller which could be set by the master. The setting have to be within the ranges of the user memory of the ESC (this is not checked by the tool). */
#ifndef MAX_PD_WRITE_ADDRESS
#define MAX_PD_WRITE_ADDRESS 0x1FFF
#endif/**
MAX_PD_READ_ADDRESS: Maximum address for the process input data (Sync Manager 3)<br>
inside the application memory of the EtherCAT Slave Controller which could be set by the master. The setting have to be within the ranges of the user memory of the ESC (this is not checked by the tool). */
#ifndef MAX_PD_READ_ADDRESS
#define MAX_PD_READ_ADDRESS 0x1FFF
#endif/**
MAX_MBX_WRITE_ADDRESS: Maximum address for the write (receive) mailbox (Sync Manager 0). The setting have to be within the ranges of the user memory of the ESC (this is not checked by the tool). */
#ifndef MAX_MBX_WRITE_ADDRESS
#define MAX_MBX_WRITE_ADDRESS 0x1FFF
#endif/**
MAX_MBX_READ_ADDRESS: Maximum address for the read (send) mailbox (Sync Manager 1). */
#ifndef MAX_MBX_READ_ADDRESS
#define MAX_MBX_READ_ADDRESS 0x1FFF
#endif禁止LAN9252的ESC EEPROM仿真
/**
ESC_EEPROM_EMULATION: If this switch is set EEPROM emulation is supported. Not all ESC types support EEPROM emulation. See ESC datasheet for more information. */
#ifndef ESC_EEPROM_EMULATION
#define ESC_EEPROM_EMULATION 0 // This define was already evaluated by ET9300 Project Handler(V. 1.3.3.0)!
#endif
中断配置
