用BC++编写的带PIC-SERVO CMC运动控制器的3轴钻床控制器和G代码解释程序

[replyview]对G码的解析、对刀路进行算法修正、对硬件接口的控制、在显示界面上的进行友好的图形展示。
Borland's C++ Builder
用BC++编写的带PIC-SERVO CMC运动控制器的3轴钻床控制器和G代码解释程序
PIC-SERVO CNC (PSCNC) is a complete example program for operating a 3-axis milling machine.
It runs under Windows 95/98/NT/2000 and interfaces to three PIC-SERVO CMC (coordinated
motion control) servo motor controllers. It includes the following features:
· Digital position readout panel displays positions in program or raw machine coordinates
· Controls for setting the origin of the program coordinate system
· Servo disable controls allows the use of hand cranks while still displaying the position
· Manual jogging controls
· G-Code Display window and immediate single-line G-Code execution
· Dynamic feed rate override, rapid speed override
· Continuous contouring of tangent and near tangent tool path segments
· Tool length compensation
The G-Code interpreter only implements a basic set G-Codes and M-Codes, but should be
sufficient in-depth evaluation purposes. The source

[replyview]

[upload=zip,pscnc.zip]viewFile.asp?ID=4856[/upload]

[/replyview]

学习一下。谢谢！